The process by which metal is cut, shaped or molded into a final product is known as metal fabrication. Here are included metal bars, metal rods, sheet metal and stock metal components that come in a wide range of material and dimensional specifications. Additionally, a lot of fabrication shops can create metal products in a vast assortment of sizes and shapes. There are times, though, when manufacturers require a non-standard, distinct metal product, and custom metal fabrication services can supply the design, as well as assist in producing these made-to-order components.
Types of Services
A custom metal fabrication service can assist in any stage of the development process. No matter what you need, whether it is a complete production run or component assembly project, you can benefit from the following different services:
- Design – a particular part or product characteristic is conceptualized, created and analyzed
- Build – the metal product is constructed
- Finishing and assembly – the quality of product is enhanced by means of post-fabrication treatments
Assembly and Finishing
Some metal products require additional finishing treatments to accomplish the specifications as planned. Assembly services may be needed as well to combine two or more components to form a single functional unit. Some of the common secondary treatments required are adhesive bonding, grinding, painting, sawing, screwing, bolting deburring and riveting.
The majority of these products are created from various metals and alloys that are commonly used, such as aluminum, silver, gold, copper, brass, nickel, iron, tin titanium and different grades of steel.
Deciding on a Shop
It is very important to decide on which shop would meet your needs and expectations, since this can have an effect on the quality of production, rate of manufacturing, plus the cost efficiency of a given project. So, consider the following factors to help you choose:
It is best to opt for a custom metal fabrication service with a good reputation in terms of service, and who has years of experience.
It would help to find out the industries that this shop services, and the kinds of products/processes it specializes in to know if they meet your requirements.
To know more about their capabilities and quality of their metal products, check the shop’s available machinery plus tooling capacity.
Type of Production
Whether the production run is high-volume vs. low-volume and short-term vs. long-term, this should be one of the crucial factors you need to consider when choosing the service that suits you best.
Last of all, you need to make sure that the custom metal fabrication service has the ability to supply the particular metal to be used for a product.